Ectogears Switch Board
search
  • Ectogears Switch Board
  • Ectogears Switch Board
  • Ectogears Switch Board
  • Ectogears Switch Board
  • Ectogears Switch Board
  • Ectogears Switch Board
  • Ectogears Switch Board

Ectogears Switch Board

$15.00
No tax Made-to-order Products : Delivered within 6-8 weeks

Essential for any EctoGears boards

Quantity

Switch Board is essential for any EctoGears equipment. It help with the boards to know either the Intensify button has been pressed or not and how long it being pressed. It also responsible to auto-connect to any other EctoGears boards.

  • Your proton pack original switches will be replaced with DPDT switches (included)
  • Switches to replace is Intensify push button and Activate toggle switch.
  • One side goes to your original proton pack and another side goes to the Switch Board
  • Requires your proton pack timing to make sure they are in sync. 
  • Setting can be configured with board Web Interface. Connect directly to the board to change them.

 

Configurations :

  • Change the firing, overheat, venting, firing delay timings
  • Skip initial startup sequence
  • Skip venting startup sequence
  • Firing mode; Normal firing and Resume
  • Firing delay; enable this if there's a delay with your stock board between Intensify being pressed and when it actually triggers.

 

NOTE 

  • Some soldering are required. 
  • Switch Board requires stable 5V to work.
SWB
10 Items

Shipping

  • All of the products are made-to-order unless stated otherwise in the product description.
  • Estimated 6 to 8 weeks for the prop to be build and preparation for shipping. Unless stated otherwise in the product description
  • Shipping is estimated to be around 2 weeks to reach any international addresses.
  • All products are shipped from Malaysia, Asia.

 

For Pre-order

  • Pre-order usually takes longer to build. Please read the pre-order item description on estimated delivery date.

 

Expedited shipping

  • If you required a expedited shipping, please contact me via email at ectogears@gmail.com to get a price quotation.
  • The expedited shipping will be handled by Aramex. Shipping estimate is between 3 to 5 business days. 

 

Note 

  • Due to shipping regulations, liquid or battery are not included.

Electronics

  • All the electronics are meant for a 5 volts system unless stated otherwise inside the product description.
  • Please use a 5V DC-DC buck to step-down your pack voltage to appropriate voltage.
  • If your pack uses Talentcell battery pack, the board can be directly connected to Talentcell USB ports.
  • Some project has a specific batteries. Please read the product description.

Material

  • All 3d printed parts are resin printed. 
  • Standard color is matte white.
  • All 3d printed parts had the support removed and basic sanding done.
  • They might requires some work before spray paint.
  • Do note that 3d printed part can deform if left in the heat and break if dropped. Handle with care.

 

DIY Finishing

  • Use plastic primer to coat the first two layer.
  • Use filler primer. Sanding with every two layers.
  • When surface is smooth, spray your base coat 
  • Spray your final color
  • Clear coat is optional. I usually skip this part.
Comments (0)
No customer reviews for the moment.