Silent smoke kit for Haslab Ghost Trap
search
  • Silent smoke kit for Haslab Ghost Trap
  • Silent smoke kit for Haslab Ghost Trap

Haslab Silent Ghost Trap Smoke Kit

$150.00
No tax

Silent smoke kit for Haslab Ghost Trap

Quantity

Specifically designed to fit Haslab Two-In-A-Box Ghost Trap. 

Smoke Kit Details

  • Silent smoke kit. No annoying air pump noise !
  • The smoke kit is triggered wirelessly. 
  • 3 x led showing light effects using light blue, light orange and light purple.
  • 1 x led showing white in the middle beside the smoke output.
  • 4.3ml liquid capacity. Tank can be easily removed from the top for coil change or to topup juice.
  • Turn on/off the kit with the top mount switch. Beside the switch is a 1A battery charger (Type-C).
  • Requires two battery
    • 102050 battery 1000mah 3.7v.
    • 18350 battery 1100mah 3.7v (High drain- 9A and above).
    • Recommended Vapcell INR 18350 1100mah 9A 3.7v .
    • Battery not included.
  • All 3D Printed parts are resin printed in white resin. You will receive unpainted version.

What included

  • Haslab Trap Smoke kit
  • 2 spare coils
  • Trigger board

Note

  • Works best when trap is on the floor
  • For safety reason and to prolong coil health, smoke timing is set to 10seconds
HSTSMOKE

Shipping

  • All of the products are made-to-order unless stated otherwise in the product description.
  • Estimated 6 to 8 weeks for the prop to be build and preparation for shipping. Unless stated otherwise in the product description
  • Shipping is estimated to be around 2 weeks to reach any international addresses.
  • All products are shipped from Malaysia, Asia.

 

For Pre-order

  • Pre-order usually takes longer to build. Please read the pre-order item description on estimated delivery date.

 

Expedited shipping

  • If you required a expedited shipping, please contact me via email at ectogears@gmail.com to get a price quotation.
  • The expedited shipping will be handled by Aramex. Shipping estimate is between 3 to 5 business days. 

 

Note 

  • Due to shipping regulations, liquid or battery are not included.

Electronics

  • All the electronics are meant for a 5 volts system unless stated otherwise inside the product description.
  • Please use a 5V DC-DC buck to step-down your pack voltage to appropriate voltage.
  • If your pack uses Talentcell battery pack, the board can be directly connected to Talentcell USB ports.
  • Some project has a specific batteries. Please read the product description.

Material

  • All 3d printed parts are resin printed. 
  • Standard color is matte white.
  • All 3d printed parts had the support removed and basic sanding done.
  • They might requires some work before spray paint.
  • Do note that 3d printed part can deform if left in the heat and break if dropped. Handle with care.

 

DIY Finishing

  • Use plastic primer to coat the first two layer.
  • Use filler primer. Sanding with every two layers.
  • When surface is smooth, spray your base coat 
  • Spray your final color
  • Clear coat is optional. I usually skip this part.
Comments (0)
No customer reviews for the moment.